Big Order? No Problem! Financing available through QUADPAY or PAYPAL 0% 6 Months Approval is Quick & Easy.
Sale
This cure is for the GM 1 ton Y link steering conversion and is designed around the GM standard 1 ton rod end. Use on any other steering kit is at ...
View full details
INCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 2.75" Width: 2.0" These Spring Perches are made for Early CJ & M series Jeep widt...
View full details
This is the way to make your existing longarm or radius arm kit actually strong enough for trail use! Quite an easy swap but think it through, add ...
View full details
We have been manufacturing steering kits and components for many many years. Throughout that time we have been repeatedly asked to build a welded k...
View full details
You will receive: 2 - spring under leaf spring plates for 2.5" springs 2 perches for 3", 3.25" or 3.5" axle tube and 2.5" wide 4 U-bolts 8" Long a...
View full details
.25" plate it is lighter and smaller to fit into tighter spaces. These have a 2 5/8" inside mounting width They are sold individually and come unwe...
View full details
NOTE: LEFT AND RIGHT (DRIVER AND PASSENGER) IS BASED ON A FRONT END APPLICATION, FOR REAR USE OPPOSITE. These have been a long time coming! They ar...
View full details
This is a pretty much our standard U-bolt made for 3" diameter axles, the exception is that they are .625" (5/8) Rolled Threads for extra strength ...
View full details
INCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 3.0"/3.25"/3.5" Width: 2.5" After we started our Desert Racing products I saw an obvi...
View full details
Whether you are wanting to build an air suspension or a Coilover rear, this is a very good candidate to start from. totally customizable fitment. ...
View full details
(Qty 6)These are the 3rd variation of our Weld Washers. For 1/4" thick plate 6 in a set These are a new version of our weld washers. These are d...
View full details
NOTE: LEFT AND RIGHT (DRIVER AND PASSENGER) IS BASED ON A FRONT END APPLICATION, FOR REAR USE OPPOSITE. These have been a long time coming! They ar...
View full details
These are designed to mount to the top of a Toyota 8" mini truck stock housing. These are not a new idea because this method has been in use for 20...
View full details
This is a simple yet complicated bracket that solves the problem of "How is it all going to fit?". These are made from .25" steel and have the opti...
View full details
These is a great way to set up the bottom link of any 3 or 4 link suspension, this link bracket is for Axle mounting, it is cut for a 3.0" Tube and...
View full details
Something new and unique that really opens up your upper link options. These are similar to some made by other companies but have 2 extra interesti...
View full details
Made from 1/4" material Fit 1 3/4" tube but can easily fit 2" with some grinding 2 5/8 (2.63) Width mounting width for rod ends 9/16" bolt hole bu...
View full details
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a S...
View full details
Sale
3/8" Thick Sold Individually These are .375" thick standard shackles. The ends are completely round to avoid any grab points from rocks. They hav...
View full details
These aluminium pucks let you assemble and weld your bushed DOM joints and brackets/tabs without having to worry about destroying your polyurethane...
View full details
This bracket makes it easy to three link a mini truck front axle. This mounts directly on top of the differential allowing your upper link to be on...
View full details
We made this 1/4" thick bracket with the factory size mounting hole to fit the upper clevite bushing on most factory TJ, LJ, XJ, ZJ, JK and MJ Jeep...
View full details
This upper axle link bracket is made from 1/4" thick steel plate and is set at a 0 degree angle. There are 3 9/16" bolt holes for adjustment, from ...
View full details
This is an old Desert Racing technique, mounting the heim horizontally to reduce strain on the wishbone joint. It has done its job well for many ye...
View full details
This is a simple yet complicated bracket that solves the problem of "How is it all going to fit?". These are made from .25" steel and have the opti...
View full details
This is a new variation of a bracket we used to make. It is lighter and smaller to fit into tighter spaces. The old 3 legged links were unstoppable...
View full details
Something new and unique that really opens up your upper link options. These are similar to some made by other companies but have 2 extra interesti...
View full details
Power Driven Diesel’s Budget Builder injectors are: Proven Performance Injector Built here in Cedar City Utah 40 horsepower over stock Come with n...
View full details
Mounting plate is 1/2" and the guard is 3/8" We have added more access to the bolts while still protecting them and they are long enough to actua...
View full details
This gasket is designed for the Dana 35 differential cover
We made this 1/4" thick bracket with the factory size mounting hole to fit the upper clevite bushing on most factory TJ, LJ, XJ, and MJ Jeeps. To ...
View full details
Rear Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's casto...
View full details
Front Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's casto...
View full details
This product corrects the many weaknesses in the factory arms with greater strength and performance. Where other companies use cheap canister type ...
View full details
I am sorry it took us so long to get these to market but they correct the many weaknesses in the factory arms with greater strength and performance...
View full details